Need help?Do you have a question about the Dahua VTO2000A and is the answer not in the manual?
General| Audio | Built-in Microphone and Speaker |
|---|---|
| Video Compression | H.264 |
| Audio Compression | G.711 |
| Ingress Protection | IP54 |
| Weight | 1.2kg |
| Processor | Dual-core |
| Operating System | Embedded Linux |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Two-way Talk | Yes |
| Network Protocol | TCP/IP |
| Alarm Input | 1 channel |
| Alarm Output | 1 channel |
| RS485 | Yes |
| Tamper Switch | Yes |
| Installation | Wall-mounted |
| IP Rating | IP54 |
| Network Interface | 10M/100M Ethernet |
| Connectivity | Ethernet |
| Power Supply | DC 12V |
| Operating Temperature | -30°C to +60°C |
| Operating Humidity | 10% to 90% |
| Door Control | Support |
| Material | Plastic |
Conform to local electrical safety codes and ensure proper grounding to reduce electric shock risk.
Avoid heavy stress, violent vibration, or water splash during transportation, storage, and installation.
Handle with care, do not apply power before installation, and avoid placing objects on the device.
Examination and repair work should only be performed by qualified service engineers.
Install the device in a cool, dry place away from direct sunlight and flammable substances.
Use manufacturer-recommended accessories and check package contents before installation.
Describes the IP connection setup for VTO2000A/VTH1550CH/VTH1560B models.
Describes the IP connection setup for VTO2000A-2/VTH1550CHW-2 models.
Provides instructions for changing VTO and account default passwords.
Covers setting VTO IP address, local information, language, and adding digital VTH.
Details on setting device language, project password, and configuring VTH as master.
Steps for configuring VTH as an extension, including room number, IP, and master IP.
Instructions for modifying the VTO IP address using the VTH interface.
Steps to check and verify VTO and VTH functionality and network connections.
Guide to adding Dahua and ONVIF network cameras to the VTH and checking results.
Instructions for adding Dahua network cameras to the VTO and verifying their status.
Setting VTO IP address for network connectivity and enabling P2P for mobile access.
Scanning QR codes to download the mobile app for iOS/Android and connect to VTO.
Checking push messages on the cell phone and viewing live video from the VTO.
Details on direct wall mounting and embedded wall installation for the VTO.
Instructions for VTH installation using two distinct mounting modes and components.
Guidance on connecting electric door locks and unlock buttons to the VTO terminals.
Instructions for connecting magnetic door locks and feedback sensors to VTO terminals.
Technical specifications for VTH1550CH and VTH1560B series models.
Technical specifications for VTO2000A and VTO2000A-2 series models.
To Next Page
