Need help?Do you have a question about the Dahua VTO2000A Series and is the answer not in the manual?
General| Model | VTO2000A Series |
|---|---|
| Power Supply | DC 12V, PoE (802.3af) |
| Operating System | Embedded Linux |
| Door Control | 1 |
| RS485 | 1 |
| Tamper-proof | Yes |
| Working Temperature | -30°C to +60°C |
| Audio | Two-way voice communication |
| Connectivity | Ethernet |
| Operating Temperature | -30°C to +60°C |
| Video Compression | H.264 |
| Day/Night | ICR |
| Audio Compression | G.711 |
| Audio Output | 1 Channel |
| Ethernet | 10/100Mbps |
| Network Protocol | TCP/IP |
| Alarm Output | 1 |
| Wiegand | Optional |
| Network Interface | RJ45 |
Details the steps for direct installation of the VTO.
Details the steps for embedding the VTO into a wall.
Explains how to connect wires for the VTO.
Details wiring for electric control and electromagnetic locks.
Guides on changing the VTO's IP address.
Overview of system configuration options via the web interface.
Details how to unlock doors remotely via center or VTH.
To Next Page