Dahua VTO2000A Series

1
4 Web Config
This chapter introduces VTO WEB interface and its parameters, and how to configure
them.
4.1 System Config
4.1.1 Local Config
4.1.1.1 Local Config
In Local Config interface, you can view VTO model, version info and etc.
Figure 4- 1
Parameter
Note
Sensor
Set compensation light threshold.
Device Type
Display device type.
Reboot Date
On the set date, device will automatically reboot.
Version Info
Display device version info.
Default
Only restore current Local Config page to default settings.
Language
There are eights languages available.
4.1.1.2 A&C Manager
A&C Manager mainly controls unlock responding interval time, unlock period and door
sensor check time.