Dahua VTO2000A Series

4.1.2 LAN Config
Here you can register VTO to center and set how to call center. Please refer to Ch 5.1.1.
4.1.3 Indoor Manager
In Indoor Manager interface, you can add, delete and modify VTH (digital indoor station),.
For example to add digital VTH:
Step 1. In tab, select System Config>Indoor Manager>Digital VTH Manager.
Step 2. Click .
Step 3. Fill in digital VTH basic info. See Figure 4- 6.
Figure 4- 6
Note:
Parameters with * are mandatory.
Parameter
Note
VTH Short
No.
VTH is indoor device, VTH no.
IP Address
Add VTH IP address.
Step 4. Click .
System displays interface when VTH is added. See Figure 4- 7.