Dahua VTO2000A Series

Figure 4- 7
 Click , in pop-up modification page modify VTH info.
1. When you modify digital VTH, you can only modify name and nickname.
2. When you modify analog VTH, you can only modify name, nickname, distributor
address and distributor port.
 Click , delete digital VTH.
4.1.4 Network Config
4.1.4.1 TCP/IP
You can set local IP network parameter.
Step 1. Select System Config>Network>TCP/IP.
Step 2. Set local IP address, subnet mask and default gateway.
See Figure 4- 8.
Figure 4- 8
Step 3. Click .