After you have modified IP address, WEB page will reboot and go to the new IP address
page.
4.1.4.2 FTP
FTP server is used to store record, snapshot picture and etc. User can login FTP server to
view and get photo or image.
You can go to System Config>Network>FTP, to set local FTP network parameter.
See Figure 4- 9.
Figure 4- 9
4.1.4.3 P2P
You can go to System Config>Network>P2P interface, select to enable P2P server, and
view info by scanning the two-dimension code at bottom of interface. See Figure 4- 10.
Figure 4- 10
To Next Page
Loading...
Need help?
General
