6
d) Set network information. See Figure 2-6.
Figure 2-6
2.3 Master Digital VTH Settings
a) When device is booting up, you can set device language. System supports English, Russian,
Italian、French, Germany, Dutch, Spanish, and Portuguese by default. See Figure 2-7. After
device booted up, you can go to Settings->Language->002236 to change language
again.
Figure 2-7
b) On the main VTH menu, from System->Project, you can input project password 002236 to
go to the project setup interface.
To Next Page
Loading...
