21
5 App Installation and Adding Device
Scan the following QR code to download and install the app.
Before adding the door station (VTO) to the gDMSS Plus, you need to change IP address of the
door station (VTO), make sure that the door station (VTO) and the router are connected to the
same network, and connect the door station (VTO) to the power source.
On your mobile phone, tap , and then follow the onscreen instructions until the
region selection interface is displayed.
Select a region.
Tap Done on the upper right corner of the interface.
The Live interface is displayed.
Live
Tap on the upper left corner of the Live interface.
The Home interface is displayed.
To Next Page
Loading...
Need help?
General
