Dahua XVR5108C-I3 User Manual

5
You can also configure network parameters in the Startup Wizard.
Figure 1-6 TCP/IP
Table 1-2 TCP/IP parameters
Parameter
Description
IP Version
In the
IP Version
list, you can select
IPv4
or
IPv6
. Both versions are
supported for access.
MAC Address Displays the MAC address of the DVR.
DHCP
Enable the DHCP function. The IP address, subnet mask and default
gateway are not available for configuration once DHCP is enabled.
●
If DHCP is effective, the obtained information will be displayed in
the
IP Address
,
Subnet Mask
and
Default Gateway
. If not, all
values show 0.0.0.0.
●
If PPPoE connection is successful, the IP address, subnet mask,
default gateway, and DHCP are not available for configuration.
IP Address Enter the IP address and configure the corresponding subnet mask
and default gateway.
IP address and default gateway must be in the same network
segment.
Subnet Mask
Default Gateway
Preferred DNS Enter the IP address of DNS.
Alternate DNS Enter the IP address of alternate DNS.

Dahua XVR5108C-I3 Specifications

General

Brand	Dahua
Model	XVR5108C-I3
Category	DVR
Language	English