4
Figure 1-4 Draw an unlock pattern
●
The pattern that you want to set must cross at least four points.
●
If you do not want to configure the unlock pattern, click
Skip.
●
Once you have configured the unlock pattern, it will be used as the default
authentication method. If you skip this setting, enter the password for login.
Step 8 (Optional) Apply reserved email and security questions to the DVR.
●
Enable
Reserved Email and enter the email address.
●
Enable
Security Question and select questions from the drop-down lists for Question
1, Question 2, and Question 3, and then enter the answers to those questions.
Figure 1-5 Apply reserved email and security questions
Step 9 Click OK.
1.3 Configuring Network
You can configure the basic network settings such as net mode, IP version, and IP address for the
DVR.
Step 1 Select
Main Menu > NETWORK > TCP/IP.
Step 2 Configure parameters.
To Next Page
Loading...
Need help?
General