Need help?Do you have a question about the Daikin 2MXS50FV1B and is the answer not in the manual?
Procedure for removing the top and front outer panels of the unit.
Steps to disconnect wiring and safely remove the main electrical box.
Steps for preparing and removing the Printed Circuit Board (PCB).
Procedure for removing the right side panel and partition plate.
Procedure for removing the outdoor fan and its associated motor.
Steps for removing various thermistors, including pipe and heat exchanger types.
Procedure for removing four way valve and outdoor electronic expansion valves.
Steps for safely disconnecting and removing the compressor unit.
Procedure for removing the top and front outer panels of the unit.
Steps to disconnect wiring and safely remove the main electrical box.
Steps for preparing and removing the Printed Circuit Board (PCB).
Procedure for removing the right side panel and partition plate.
Procedure for removing the outdoor fan and its associated motor.
Steps for removing various thermistors, including pipe and heat exchanger types.
Procedure for removing four way valve and outdoor electronic expansion valves.
Steps for safely disconnecting and removing the compressor unit.
General| Cooling Capacity | 5.0 kW |
|---|---|
| Heating Capacity | 5.8 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Sound Power Level | 61 dBA |
| Outdoor Unit Noise Level | 48 dBA |
| Indoor Unit Weight | 9.5 kg |
| Type | Split |
| Power Supply | 220-240V / 50Hz / 1Ph |
| Refrigerant | R32 |
To Next Page