What to do if my Daikin 4MXD80BVMA does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
What to do if Daikin Air conditioning operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
What to do if water leaks from the indoor unit of Daikin 4MXD80BVMA Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
Why my Daikin 4MXD80BVMA operation does not start soon?
You should wait for about 3 minutes.
What to do if I hear an abnormal sound during Daikin 4MXD80BVMA Air conditioning operation?
If you hear an abnormal sound during operation, turn the breaker OFF and call the service shop.
What to do if there is a burning smell coming from Daikin 4MXD80BVMA?
If you notice a burning smell, immediately turn the breaker OFF and call the service shop.
What to do if an abnormality (such as a burning smell) occurs with Daikin 4MXD80BVMA?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
How to stop the bad odor from my Daikin 4MXD80BVMA Air conditioning indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
Why is my Daikin 4MXD80BVMA Air conditioning cooling/heating effect poor?
The cooling or heating effect might be poor due to several reasons. Check if the air filters are clean. Ensure there is nothing blocking the air inlet or outlet of the indoor and outdoor units. Verify that the temperature setting is appropriate. Make sure the windows and doors are closed. Confirm that the airflow rate and direction are set correctly. Also, check if the unit is set to INTELLIGENT EYE mode.
What to do if the power cord of Daikin 4MXD80BVMA Air conditioning is abnormally hot or damaged?
If the power cord is abnormally hot or damaged, turn the breaker OFF and call the service shop.
Essential safety precautions to be followed before operating or repairing the air conditioner.
Details the functions available for cooling-only models.
Details the functions available for heat pump models.
Technical specifications for cooling-only indoor units.
Specifies the control logic for various operational aspects and modes.
Important warnings and considerations before performing diagnostic procedures.
Lists common operational problems and their corresponding checks and measures.
Provides detailed steps for diagnosing and resolving various system faults.
General| Model | 4MXD80BVMA |
|---|---|
| Cooling Capacity | 8.0 kW |
| Heating Capacity | 9.0 kW |
| Refrigerant | R32 |
| Type | Multi Split System |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240V / 50Hz / 1 Phase |
| Connections Liquid | 6.35 mm (1/4 inch) |
| Connections Gas | 9.52 mm (3/8 inch) |
| Sound Pressure Level Cooling | 52 dB |
| Outdoor Unit Noise Level | 52 dBA |
| Indoor Unit Compatibility | Compatible with multiple indoor units |
To Next Page