What to do if my Daikin Air conditioning does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
What to do if Daikin FTXS25BVMA Air conditioning operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
What to do if water leaks from the indoor unit of Daikin FTXS25BVMA Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
Why my Daikin Air conditioning operation does not start soon?
You should wait for about 3 minutes.
What to do if I hear an abnormal sound during Daikin FTXS25BVMA operation?
If you hear an abnormal sound during operation, turn the breaker OFF and call the service shop.
What to do if there is a burning smell coming from Daikin FTXS25BVMA Air conditioning?
If you notice a burning smell, immediately turn the breaker OFF and call the service shop.
What to do if an abnormality (such as a burning smell) occurs with Daikin FTXS25BVMA?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
How to stop the bad odor from my Daikin FTXS25BVMA indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
Why is my Daikin FTXS25BVMA cooling/heating effect poor?
The cooling or heating effect might be poor due to several reasons. Check if the air filters are clean. Ensure there is nothing blocking the air inlet or outlet of the indoor and outdoor units. Verify that the temperature setting is appropriate. Make sure the windows and doors are closed. Confirm that the airflow rate and direction are set correctly. Also, check if the unit is set to INTELLIGENT EYE mode.
What to do if the power cord of Daikin Air conditioning is abnormally hot or damaged?
If the power cord is abnormally hot or damaged, turn the breaker OFF and call the service shop.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Weight | 8 kg |
| Refrigerant Type | R32 |
| Type | Split |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
General safety instructions classified into warnings and cautions.
Precautions to prevent fire, explosion, or injury during operation.
Safety measures related to electrical shock and proper earthing.
Avoiding damage to the unit and protecting sensitive items from airflow.
Safety rules for outdoor unit, children, and general handling.
Guidelines for installation site selection and electrical work.
Ensuring proper drainage and keeping units clear of obstructions.
Identification of main parts of the indoor unit.
Explanation of the ON/OFF switch and operation lamps.
Identification of main parts of the outdoor unit.
Detailed list and function of indoor unit components.
Detailed list and function of outdoor unit components.
Introduction to the remote controller and its signal transmitter.
Detailed explanation of each button on the remote controller.
Step-by-step guide to insert batteries into the remote controller.
Guidelines and attention points for battery usage and replacement.
How to operate the remote controller and its limitations.
Instructions for installing the remote controller holder on a wall.
Important notes on sunlight, dust, and interference affecting the remote.
Procedure to set the current time on the air conditioner.
Explanation of the flap movement upon turning the breaker ON.
Advice for energy efficiency and recommended operating ranges.
How to start and stop AUTO, DRY, COOL, HEAT, FAN modes.
Guide to changing temperature settings for different modes.
How to change the fan speed in various operation modes.
Using quiet operation and understanding specific mode notes.
Using the SWING button to adjust the horizontal air direction.
How to manually adjust the vertical louvers for airflow direction.
Information and cautions regarding flap swing and louver angles.
How to start the POWERFUL operation for maximum effect.
How to stop the POWERFUL operation.
Notes and limitations specific to the POWERFUL operation mode.
How to activate the silent operation for the outdoor unit.
How to turn off the outdoor unit silent operation.
Availability and specific conditions for the silent operation mode.
How to start the HOME LEAVE operation.
How to stop the HOME LEAVE operation.
How to record preferred temperature and airflow for HOME LEAVE.
Detailed explanation of the HOME LEAVE function.
Use cases for energy saving and favorite mode settings.
Important notes on mode compatibility and operation.
How to turn on the INTELLIGENT EYE sensor.
How to turn off the INTELLIGENT EYE sensor.
How to adjust the detection angle of the sensor.
How the sensor contributes to energy efficiency.
Application range, limitations, and safety warnings for the sensor.
How to set the timer to automatically switch the unit OFF.
How to cancel an active OFF timer.
General notes and considerations for using timer functions.
How the OFF timer works with the NIGHT SET MODE.
How to set the timer to automatically switch the unit ON.
How to cancel an active ON timer.
Example of using both ON and OFF timers together.
Situations requiring timer settings to be reapplied.
Definition and basic concept of a multi-system.
How operation modes are prioritized in a multi-system.
Details and availability of NIGHT QUIET mode for multi-systems.
Usage of SILENT operation across multiple indoor units.
Functionality and purpose of the Mode Lock feature.
How priority room affects operation mode selection.
How priority room affects POWERFUL operation.
How priority room affects SILENT operation.
Essential safety steps before performing any cleaning.
Detailed steps for cleaning the front grille.
Instructions for cleaning and replacing air filters.
Maintenance and replacement of the air purifying filter.
Maintenance and replacement of the photocatalytic deodorizing filter.
Checks to perform on the unit before operation.
Steps for preparing the unit when it will not be used for a long time.
Information on ordering filters and general filter notes.
Steps to take when the unit doesn't operate or performs poorly.
Troubleshooting for unexpected stops or flashing operation lamps.
Checks for abnormal functioning, including multi-system considerations.
Warnings for abnormalities and symptoms requiring immediate service.
Actions to take after power failures or lightning strikes.
Guidelines for unit disposal and recommendations for periodic maintenance.
To Next Page
