What to do if my Daikin Air conditioning does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
What to do if Daikin FTXS35BVMA operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
What to do if water leaks from the indoor unit of Daikin Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
Why my Daikin FTXS35BVMA Air conditioning operation does not start soon?
You should wait for about 3 minutes.
What to do if I hear an abnormal sound during Daikin FTXS35BVMA Air conditioning operation?
If you hear an abnormal sound during operation, turn the breaker OFF and call the service shop.
What to do if there is a burning smell coming from Daikin Air conditioning?
If you notice a burning smell, immediately turn the breaker OFF and call the service shop.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
How to stop the bad odor from my Daikin Air conditioning indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
Why is my Daikin Air conditioning cooling/heating effect poor?
The cooling or heating effect might be poor due to several reasons. Check if the air filters are clean. Ensure there is nothing blocking the air inlet or outlet of the indoor and outdoor units. Verify that the temperature setting is appropriate. Make sure the windows and doors are closed. Confirm that the airflow rate and direction are set correctly. Also, check if the unit is set to INTELLIGENT EYE mode.
What to do if the power cord of Daikin Air conditioning is abnormally hot or damaged?
If the power cord is abnormally hot or damaged, turn the breaker OFF and call the service shop.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Refrigerant | R410A |
| Indoor Unit Dimensions (H x W x D) | 295 x 870 x 215 mm |
| Outdoor Unit Dimensions (H x W x D) | 550 x 780 x 290 mm |
| Type | Split System |
| Power Supply | 220-240V / 50Hz |
| Outdoor Unit Noise Level | 48 dBA |
Covers fire, explosion, injury, gas, earthing, quality, children, open fire, and air flow blockage warnings.
Covers outdoor unit handling, electrical safety, installation site, noise, and neighbor considerations.
Identifies components of the indoor unit and the remote controller.
Provides specific descriptions for indoor and outdoor unit parts.
Explains the remote's display, buttons, setup, and general handling cautions.
Instructions for mounting the holder and notes on signal interference.
Steps for setting the clock and turning on the main breaker.
How to initiate, stop, and select AUTO, DRY, COOL, HEAT, or FAN modes.
Instructions for changing temperature settings and air flow rates.
Controlling horizontal and vertical air direction using flaps and louvers.
Details on activating and using these specialized modes.
Explains functions for personalized comfort and energy saving.
How to adjust the sensor, its energy saving benefits, and important cautions.
Procedures for programming scheduled operation start and stop times.
Important information about timer memory, night mode, and resets.
How to manage multiple indoor units and priority room configurations.
Details on noise reduction and forced mode settings.
Instructions for cleaning the front grille and general unit surfaces.
Procedures for cleaning and replacing air filters.
Checks before long storage and notes on filter condition.
Explains common occurrences that are not actual faults.
Steps to diagnose problems and identifies critical issues requiring immediate service.
Guidance on when to call service, disposal, and periodic maintenance.
To Next Page
