What to do if my Daikin FTXS71BVMA8 does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
What to do if Daikin FTXS71BVMA8 Air conditioning operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
What to do if water leaks from the indoor unit of Daikin Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
Why my Daikin FTXS71BVMA8 operation does not start soon?
You should wait for about 3 minutes.
What to do if I hear an abnormal sound during Daikin Air conditioning operation?
If you hear an abnormal sound during operation, turn the breaker OFF and call the service shop.
What to do if there is a burning smell coming from Daikin FTXS71BVMA8?
If you notice a burning smell, immediately turn the breaker OFF and call the service shop.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
How to stop the bad odor from my Daikin FTXS71BVMA8 Air conditioning indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
Why is my Daikin Air conditioning cooling/heating effect poor?
The cooling or heating effect might be poor due to several reasons. Check if the air filters are clean. Ensure there is nothing blocking the air inlet or outlet of the indoor and outdoor units. Verify that the temperature setting is appropriate. Make sure the windows and doors are closed. Confirm that the airflow rate and direction are set correctly. Also, check if the unit is set to INTELLIGENT EYE mode.
What to do if the power cord of Daikin FTXS71BVMA8 is abnormally hot or damaged?
If the power cord is abnormally hot or damaged, turn the breaker OFF and call the service shop.
General| Type | Split System |
|---|---|
| Cooling Capacity | 7.1 kW |
| Heating Capacity | 8.0 kW |
| Outdoor Unit Noise Level | 47 dB(A) |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Unit Dimensions (WxHxD) | 1, 100 x 315 x 225 mm |
| Outdoor Unit Dimensions (WxHxD) | 800 x 540 x 300 mm |
Details functions specific to heat pump models.
Details functions specific to cooling-only models.
Technical specifications for indoor units in cooling mode.
Technical specifications for indoor units in heat pump mode.
Technical specifications for outdoor units in cooling mode.
Technical specifications for outdoor units in heat pump mode.
Wiring diagram for wall-mounted indoor units, 20/25/35 class.
Wiring diagram for wall-mounted indoor units, 50/60/71 class.
Wiring diagram for duct-connected indoor units.
Wiring diagram for floor/ceiling suspended dual type units.
Wiring diagram for floor-standing indoor units.
Wiring diagram for outdoor units.
Essential safety guidelines and warnings for handling the equipment.
Overview of the primary operational capabilities of the air conditioner.
Explanation of how compressor frequency is controlled for capacity adjustment.
How indoor unit fan speed is adjusted automatically or manually.
Function for dehumidifying while maintaining room temperature.
Automatic selection of cooling or heating mode based on conditions.
Mode for economical operation during sleep.
Sensor-based operation for energy saving by detecting human presence.
Function for maintaining comfortable temperature during absence.
Operation to maximize cooling/heating capacity quickly.
Explanation of the roles of key internal components.
Details the purpose and function of various thermistors in the system.
Technical details on how the system's operations are controlled.
How compressor frequency is determined and adjusted.
Specific controls for mode transitions and startup sequences.
Control logic based on discharge pipe temperature.
Control logic based on detected input current.
Mechanism to prevent the indoor heat exchanger from freezing.
Control to limit peak power usage during heating.
How fan operation is managed across various modes and conditions.
Function to protect the compressor from moisture issues.
Control logic for managing the defrost cycle in heat pump mode.
Critical safety guidelines for installation and operation.
Common issues and their solutions for user-level problems.
Using the operation lamp status for initial troubleshooting.
Comprehensive guide to diagnosing and resolving system faults.
To Next Page