What to do if the safety breaker, a fuse, or the earth leakage breaker cuts off the operation frequently for Daikin FTXS71BVMA8?
If the safety breaker, a fuse, or the earth leakage breaker cuts off the operation frequently, turn the breaker OFF and call the service shop.
What to do if a switch or a button often fails to work properly on Daikin Air conditioning?
If a switch or button often fails to work properly, turn the breaker OFF and call the service shop.
What to do if an abnormal functioning happens during Daikin FTXS71BVMA8 operation?
If an abnormal functioning happens during operation, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
Why did my Daikin FTXS71BVMA8 Air conditioning operation stop suddenly, but the OPERATION lamp is on?
General| Type | Split System |
|---|---|
| Cooling Capacity | 7.1 kW |
| Heating Capacity | 8.0 kW |
| Outdoor Unit Noise Level | 47 dB(A) |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Unit Dimensions (WxHxD) | 1, 100 x 315 x 225 mm |
| Outdoor Unit Dimensions (WxHxD) | 800 x 540 x 300 mm |
Details functions specific to heat pump models.
Details functions specific to cooling-only models.
Technical specifications for indoor units in cooling mode.
Technical specifications for indoor units in heat pump mode.
Technical specifications for outdoor units in cooling mode.
Technical specifications for outdoor units in heat pump mode.
Wiring diagram for wall-mounted indoor units, 20/25/35 class.
Wiring diagram for wall-mounted indoor units, 50/60/71 class.
Wiring diagram for duct-connected indoor units.
Wiring diagram for floor/ceiling suspended dual type units.
Wiring diagram for floor-standing indoor units.
Wiring diagram for outdoor units.
Essential safety guidelines and warnings for handling the equipment.
Overview of the primary operational capabilities of the air conditioner.
Explanation of how compressor frequency is controlled for capacity adjustment.
How indoor unit fan speed is adjusted automatically or manually.
Function for dehumidifying while maintaining room temperature.
Automatic selection of cooling or heating mode based on conditions.
Mode for economical operation during sleep.
Sensor-based operation for energy saving by detecting human presence.
Function for maintaining comfortable temperature during absence.
Operation to maximize cooling/heating capacity quickly.
Explanation of the roles of key internal components.
Details the purpose and function of various thermistors in the system.
Technical details on how the system's operations are controlled.
How compressor frequency is determined and adjusted.
Specific controls for mode transitions and startup sequences.
Control logic based on discharge pipe temperature.
Control logic based on detected input current.
Mechanism to prevent the indoor heat exchanger from freezing.
Control to limit peak power usage during heating.
How fan operation is managed across various modes and conditions.
Function to protect the compressor from moisture issues.
Control logic for managing the defrost cycle in heat pump mode.
Critical safety guidelines for installation and operation.
Common issues and their solutions for user-level problems.
Using the operation lamp status for initial troubleshooting.
Comprehensive guide to diagnosing and resolving system faults.
To Next Page