To use WEEKLY TIMER operation
Setting mode
• Make sure the day of the week and time are set.
If not, set the day of the week and time.
6:00 8:30 17:30 22:00
77°F (25°C)
81°F (27°C)
program 1 program 2 program 3 program 4
ON OFF ON OFF
[Monday]
Setting Displays
Day and number ON/OFF Time Temperature
1.
Press .
• The day of the week and the reservation number of the current day will be displayed.
• 1 to 4 settings can be made per day.
• Pressing changes the reservation number and the day of the week.
3.
Press .
• The day of the week and reservation number will be set.
• “ ” and “ ” blink.
4.
Press to select the desired mode.
• Pressing changes the “ ” or “ ” setting in sequence.
ON TIMER OFF TIMER
blank
No Setting
Pressing puts the sequence in reverse.
5.
Press .
2.
Press to select the desired day of the week
and reservation number.
• In case the reservation has already been set, selecting “ blank ” deletes the reservation.
• Proceed to STEP
9 if “ blank ” is selected.
• To return to the day of the week and reservation number setting, press .
• The ON/OFF TIMER mode will be set.
• “ ” and the time blink.
To Next Page
Loading...
