Daikin Altherma 3 H HT F+W - Using and Programming Schedules

4 | Operation
User reference guide
42
ETVH/X16S18+23DA6V+9W(G) + ETBH/X16DA6V+9W
Daikin Altherma 3 H HT F+W
4P586456-1 – 2019.07
4.8.3 Using and programming schedules
About schedules
Depending on your system layout and installer configuration, schedules for
multiple controls may be available.
You can:
▪ Select which schedules you currently want to use.
▪ Program your own schedules if the predefined schedules are not satisfactory.
The actions you can program are control specific.
Possible scheduling screens
Name and location Usage
[1.2] Room > Heating
schedule
Program the desired room temperature in
heating mode.
[1.3] Room > Cooling
schedule
Program the desired room temperature in
cooling mode.
[2.2] Main zone > Heating
schedule
Program the desired leaving water temperature
for the main zone in heating mode.
[2.3] Main zone > Cooling
schedule
Program the desired leaving water temperature
for the main zone in cooling mode.
[3.2] Additional zone >
Heating schedule
Program the desired leaving water temperature
for the additional zone in heating mode.
[3.3] Additional zone >
Cooling schedule
Program the desired leaving water temperature
for the additional zone in cooling mode.
[4.2] Space heating/
cooling > Operation mode
schedule
See "4.6.2Setting the space operation
mode"[431].
[5.5] Tank > Schedule Program the domestic hot water tank
temperature for your normal domestic hot
water needs:
▪ Comfort
▪ Eco
▪ Stop
[7.4.2] User settings >
Quiet > Schedule
Program when the unit has to use which quiet
mode level:
▪ Off
▪ Quiet
▪ More quiet
▪ Most quiet
[7.5.4] User settings >
Electricity price >
Schedule
Program when a certain electricity tariff is valid.
Example of programming a schedule
See "4.8.4Schedule screen: Example"[443].