Daikin Altherma EABH16DA9W - Page 102

10/10
Breadcrumb Field code Setting name Range, step
Default value
Date Value
Installer setting at variance with
default value
Field settings table
9.I [E-04] R/O 0: No
1: Yes
9.I [E-05] R/W
0: No (*3)
1: Yes
(
*4
)
9.I [E-06] R/O 0: No
1: Yes
9.I [E-07] R/W
0~6
0: EKHW (*3)
1: Integrated (*4)
5: EKHWP
(
*3
)
9.I [E-08] R/O
0: disabled
1: Enabled
9.I [E-09]
1
9.I [E-0A]
0
9.I [E-0B]
0
9.I [E-0C]
0
9.I [E-0D] R/W
0: No
1: Yes
9.I [E-0E]
0
9.I [F-00] R/W
0: Disabled
1: Enabled
9.I [F-01] R/W 10~35°C, step: 1°C
20°C
9.I [F-02]
3
9.I [F-03]
5
9.I [F-04]
0
9.I [F-05]
0
9.I [F-09] R/W
0: Disabled
1: Enabled
9.I [F-0A]
0
9.I [F-0B] R/W
0: No
1: Yes
9.I [F-0C] R/W 0: No
1: Yes
9.I [F-0D] R/W 0: Continuous
1: Sample
2: Re
q
uest
Is the power saving function available on the outdoor unit?
Pump operation allowed outside range.
Is the system filled with glycol ?
--
--
Above which outdoor temperature is cooling allowed?
--
--
Can the system prepare domestic hot water?
Is a DHW tank installed in the system?
What kind of DHW tank is installed?
Power saving function for outdoor unit.
--
--
Close shut-off valve during cooling?
What is the pump operation mode?
--
--
Pump operation during flow abnormality.
--
Close shut-off valve during thermo OFF?
Is a bi-zone kit installed?
4P556072-1 - 2018.12 (#) Setting is not applicable for this unit.
(*1) *6V_(*2) *9W_
(*3) *AB*_(*4) EAV*_
(*5) *X*_(*6) *H*_
(*7) EAV*18*_(*8) EAV*23*