ARC412 Series Si10-416A
192 Operation
Step 1 ......
At the start of HEAT mode, the air blows out horizontally.
Step 2 ......
When the air temperature has risen, the unit starts
warming up the floor.
Step 3 ......
When the flow and the walls are warmed up, the warm
air starts blowing toward the area around people.
Left/Right air flow direction adjustment
The vertical louvers may be adjusted as you please.
Note:
If adjustment is carried out during flap swing, the flap
may strike your hand. Make adjustments once the swing
has completely stopped at the appropriate position.
To Next Page
Loading...
