Si10-416A ARC417 Series
Operation 233
<Note on HOME LEAVE Operation>
HOME LEAVE Operation is only available in COOL and HEAT modes.
(Cannot be used in AUTO, DRY, and FAN modes.)
HOME LEA
mode the unit was in before using HOME LEAVE Operation.
VE Operation runs in accordance with the operation
HOME LEAVE Operation can be set within the ranges shown below.
Temperature: (During heating) 10˚C to 30˚C
(During cooling) 18˚C to 32˚C
Air flow rate: 5 steps from weak to strong, or automatic.
Using PO
will disengage HOME LEAVE Operation.
WERFUL operation during HOME LEAVE Operation
T
LEAVE Operation will shut the unit off. The unit will continue in
HOME LEAVE Operation when turned back on.
urning the unit off by flipping the switch on the unit during HOME
T
Operation will shut the unit off.
urning the unit off with the remote control during HOME LEAVE
H/P: HOME LEAVE Operation will be disengaged when the unit is turned back on.
C/O: HOME LEAVE Operation will continue when the unit is turned back on.
To Next Page
Loading...
