Need help?Do you have a question about the Daikin ATX20JV1B and is the answer not in the manual?
General| Model | ATX20JV1B |
|---|---|
| Category | Heat Pump |
| Type | Split System |
| Cooling Capacity | 2.0 kW |
| Heating Capacity | 2.5 kW |
| Refrigerant | R32 |
| Noise Level (Indoor Unit) | 19 dB(A) |
| SEER | 6.1 |
| Indoor Unit Weight | 9 kg |
| Power Supply | Single Phase |
| Voltage (V) | 220-240 V |
General safety instructions and warnings for repair work and product usage.
Explains icons used to attract the reader's attention to specific information.
Lists and categorizes various functions and features available for the indoor units.
Detailed specifications for various indoor unit models, including capacity, airflow, power, and dimensions.
Detailed specifications for outdoor units, including capacity, compressor, airflow, and dimensions.
Wiring diagrams for various indoor unit control PCBs and components.
Wiring diagrams for wired and wireless remote controller models.
Wiring diagrams for outdoor unit PCBs and components.
Details functions and operations of Room Air (RA) type indoor units.
Details functions and operations of Supply Air (SA) type indoor units.
Explains the function and role of various thermistors in temperature sensing.
Outlines control specifications, including mode hierarchy and frequency control.
Explains the operation and buttons of remote controllers for RA indoor units.
Explains the operation and buttons of remote controllers for SA indoor units.
Guides on troubleshooting errors indicated by LED blinking patterns on indoor and outdoor units.
Lists common problems and their corresponding troubleshooting steps and measures.
Procedures for performing service check functions using remote controllers.
Explains error codes displayed on remote controllers for RA and SA indoor units.
Detailed troubleshooting steps for various abnormalities in RA indoor units.
Detailed troubleshooting steps for various abnormalities in SA indoor units.
Troubleshooting guide for common errors and abnormalities in outdoor units.
Procedures for checking specific components like thermistors, fan motors, and PCBs.
Procedure for pump down operation, important for relocation or disposal.
Details the procedure for forced cooling operation.
Instructions for performing trial operation of indoor units.
Guides on setting up indoor and outdoor units based on installation conditions.
Instructions on applying silicon grease during PCB replacement for heat dissipation.
Diagrams illustrating refrigerant piping connections for indoor and outdoor units.
Electrical wiring diagrams for indoor and outdoor units, including PCB connections.
References to separate booklets for component removal procedures.
To Next Page