Daikin BRC1D61 - Interpreting Timer Action Readings; Understanding Timer Behavior; Manual Override and Timer Logic

The
©%&
button
is
used
to
exit
browsing
at
once
(without
having
to
scroll
through
all
programmed
actions).
Press
the
button
to
enter
the
browse
made,
the
©
icon
appears,
HON
will
blink.
NOTE
Browsing
always
starts
on
Monday
and
D
cit
ends
on
Sunday.
Check
the
123465
icon.
if
at
least
1
action
is
programmed for Monday, 1 will appear.
The
clock
indicates
the
time
when
the
programmed
action is scheduled, either C48, OFF or j§ ah and
G7 & is being displayed.
NOTE The temperatures mentioned above are
m=—
for
clarifying
purposes
only,
temperature
= values on your controller may vary.
If 1 does not appear, it indicates that there are no
programmed actions for Monday,
Press the » button again to go to the next day of
the week. JE will blink, this indicates that the
programmed actions for Tuesday are being browsed.
The process described above Is now restarted.
If at least 1 action is programmed for Tuesday, 1 will
appear. The clock indicates the time when the
programmed action will be enabled, either C42,
OFF or /& 8" and 32 & is being displayed.
If 1 does not appear, it indicates that there are no
programmed actions for Tuesday.
Press the co) button to display the next programmed
action. If a second action is programmed for Tuesday,
TE will still be blinking and 1 2 will appear.
Assuming that 5 actions were programmed for
Tuesday, a total of 5 presses will be required to
display all programmed actions.
Continue
pressing
the
®&
button
until
the
day
of
the
week
indicator
displays
the
current
day
(not
blinking),
you
have
now
quit
browsing.
NOTE
the
number
of
times
that
the
>
button
q-
will
have
to
be
pressed
to
quit
browsing
=
depends
on the
number
of
programmed
actions
in
the
schedule
timer.
How
do
|
interpret
the
programmed
actions
To
be
able
to
understand
the
behaviour
of
your
installation
when
the
schedule
timer
is
enabled,
it
is
important
to
look
at
all
programmed
actions
for
the
current
day
and
maybe
the
last
programmed
action
of
yesterday.
If
the
first
programmed
action
for
today
is
not
active
yet,
the
current
status
of
your
installation
depends,
most
probably
but
not
necessarily,
on
the
last
programmed
action
from
yesterday..
Read
the
important
note
below.
lf the first programmed action for today is already
active, the current status of your installation depends,
most probably but not necessarily, on the parameters
Programmed in the first programmed action for today.
Read the important note below.
NOTE To keep the operation of your installation
m= simple, the schedule timer settings can
Py easily be overruled by altering the current
setting ("last command" overrules
Previous command until next scheduled
command).
Conclusion: Although © is displayed, somebody
might have altered the settings. The next
programmed action will overrule the altered settings
and all settings return as programmed.
Operation
manual
DAIKIN
BRC1D61
9
Remote controller
3P107422-3D