Daikin BRC1H61W - Remote Controller Installation Procedure

6
Remote controller installation
procedure
Deciding where to install the remote controller
Select the installation location based on “Safety Precautions” (see page 2) and obtain
consent of the customer.
Creating a wiring through-hole in the wall (when opening a
hole in the wall and installing)
If the hole size is too large or not in the
proper location, it may be seen after the
remote controller is installed.
NOTE
3-11/64 (80.5)
13/64
(5)
33/64 (13)
1-47/64 (44)
9/32 (7)
R3/32(2.5)
R3/32(2.5)
13/64
(5)
41/64
(16.25)
1-47/64 (44)
35/64
(13.75)
3-11/64 (80.5)
Back plate
Through-hole
Align the centre of the wall
hole with the centre of the
access hole on the controller
back plate when planning the
installation.
Access hole
[Unit : inch (mm)]
Back plate
Through-hole
Access
hole
CAUTION
• Note that if the wiring through-hole is large or deviates from the specied position, the hole may be
exposed.
01_EN_3P607378-2B_IM-K.indd 6 2020/07/28 11:39:51