31
R/C Setting
R/C setting method
This section describes how to perform R/C setting.
Refer to page 23 and enter the installer menu.
Installer menu screen
Press or button, move to “ ”.
If Bluetooth is connected, performing eld setting from
the remote controller side is impossible.
Disconnect Bluetooth, or perform eld setting from the
mobile application.
Sub-menu screen
Mode
R
1
Unit
– –
a
b
Press or button, to select Mode No. and press
to enter the eld setting menu.
a Mode No.
b Unit No.
Sub-menu screen
Mode
R
3
Unit
– –
Press or button, to scroll to the desired Mode No.
and press
button.
Sub-menu screen
Mode
R
3
Unit
– –
Press or button, to select “ ”, and then press
button to set the selection.
01_EN_EM19A034_IM.indd 31 2020/09/02 15:53:21