4
READ BEFORE OPERATION
Preparation before Operation
■
Turn the breaker ON
Turn the breaker ON if nothing is displayed on the LCD of the remote controller.
■
Time and Day Settings
●
“Mo”, “
”, “SET” : blinks
●
The above appears if no time and day settings have been made yet.
To ch an ge t he cur r ent t im e and day settings, begin with STEP 2.
Press “ button”.
●
The normal display will appear after a while if you do
not press a button.
In this case press the “
button” once again.
Press “ button”.
●
“
” is displayed on the LCD.
“Mo” blinks.
●
Go to the day setting section.
Press “ , button” and
select the day.
●
Days are displayed on the LCD.
Mo Tu We Th Fr Sa Su
Press “ button”.
●
“
”: blinks
●
Go to the time setting section.
Press “ , button” to
adjust the present time.
●
Keep pressing the button to advance the displayed
time quickly.
01_EN_3P531329-1.indd Sec1:6 1/05/2018
This setting can only be undertaken via the main controller only.
To Next Page
