Additional Notes
What is Shared Data?
There are many dierent models of equipment oered
under the 9-Tap platforms; however, all these models use
only a small handful of control boards. To make sure each
control board can work inside its intended chassis, we load
each board with a small amount of chassis-specic data
when the equipment is assembled. Not all 9-Tap control
use shared data.
When is it Necessary to Load Shared Data?
Shared Data update is typically only needed when switch-
ing out the 9-Tap HVAC equipment control board if perfor-
mance enhancements were made to the existing shared
data set.