What to do if my Daikin EDBE81-327 Air Cleaner isn't operating?
First, ensure the unit is securely inserted and properly set. If the problem persists, check the remote controller's batteries and replace them if necessary.
What to do if my Daikin EDBE81-327's cleaning effect is not obtained?
First, check the unit's location. If there are obstructions close to the unit, remove them. Also, check the pre-filter or filter roll for excessive dust; clean or replace them as needed.
What to do if the clean monitor (dust) on my Daikin EDBE81-327 is red and doesn't change?
This issue is likely caused by dust clogging the inside of the dust sensor. Remove the dust from the dust sensor air intake using the nozzle for small spaces on an electric vacuum cleaner. After removing the dust, manually operate the unit for about half a day to restore it to its normal state.
Why is my Daikin EDBE81-327 making crackling or buzzing sounds?
The crackling or buzzing sound might be due to a few reasons. Ensure the plasma ionizer is securely set. Check if dust is adhering to the ionizing line of the plasma ionizer and clean it if necessary. If water has entered the spurt hole, moistening the negative ionization assembly, allow it to dry, and the sound should disappear.
Why is there an odor coming from my Daikin EDBE81-327?
If a large amount of odor is being generated temporarily (like from smoking or grilling), the odor should gradually disappear with continued operation. Also, check if the pre-filter or plasma ionizer is dirty and clean it if necessary.
Why is my television screen distorted when my Daikin EDBE81-327 is on?
If a television or radio is installed within 2 meters of the unit, or if an indoor antenna is being used close to the unit, separate them by 2 meters or more. Also, keep the power cord and antenna of the television or radio as far away from the air cleaner as possible.
General| Brand | Daikin |
|---|---|
| Model | EDBE81-327 |
| Category | Air Cleaner |
| Language | English |
Details the key features of the air purifier, including performance and unique functions.
Explains the operational performance metrics, such as negative ion distribution and suction capabilities.
Describes various operational modes like Turbo, Pollen, and easy maintenance features.
Specifies the recommended operating conditions for temperature, humidity, and room area.
Defines the suitable room area for effective operation of the air purifier.
Provides a detailed list of technical specifications, including dimensions, power, and performance metrics.
Illustrates the physical dimensions and required installation space for the air purifier.
Presents the internal wiring diagram of the air purifier for technical reference.
Shows the components included in the product packaging and how they are arranged.
Provides an overview of the air purifier's features, accessories, and basic usage tips.
Lists essential safety warnings and cautions to ensure safe operation and prevent hazards.
Identifies and explains the function of each component of the main unit and its display.
Guides users through the necessary steps before initial operation, including setup and filter installation.
Explains how to use the remote controller and main unit buttons to operate various functions.
Provides instructions on how to clean and maintain the air purifier's components.
Outlines initial checks to perform when troubleshooting operational issues with the air purifier.
Offers specific solutions for common problems based on symptoms and diagnoses.
Details the steps for removing external parts and components of the air purifier.
Explains the procedure for safely removing the ionizing wire from the unit.
Guides on how to remove electrical components, including the special inverter lamp.
Provides instructions for the removal and replacement of printed circuit boards (PCBs).
Describes the process for removing the fan motor from the air purifier unit.
To Next Page
