Daikin EHBH04CB - User Manual

Other manuals for Daikin EHBH04CB

Questions and Answers

T
Tiffany JordanAug 11, 2025
How to adjust the Daikin EHBH04CB Temperature Controller when the room is too hot or cold?
- S
  smaddoxAug 11, 2025
  If you're feeling too cold or too hot in your living room when using the Daikin Temperature Controller, it might be because the desired room temperature is set too low or too high. Try increasing or decreasing the desired room temperature. If the issue happens daily, either increase or decrease the room temperature preset value, or adjust the room temperature schedule. Also, if the desired room temperature cannot be reached, increase the desired leaving water temperature in accordance with the heat emitter type.
J
Jennifer MartinAug 21, 2025
What to do if my Daikin EHBH04CB shows a heat pump failure?
- W
  Walter TaylorAug 22, 2025
  If your Daikin Temperature Controller displays a heat pump failure, first press the displayed button to view a description of the problem. Press the button again. Then, select the option to allow the backup heater to take over the heat load. Finally, call your local dealer to get the heat pump fixed, as the heat pump is damaged.
E
Elizabeth MorrisonAug 30, 2025
Why is the water at the tap too cold with my Daikin EHBH04CB, and what to do?
- P
  Paul RiggsAug 30, 2025
  If the water at the tap is too cold when using the Daikin Temperature Controller, it's possible you've run out of domestic hot water due to unusually high consumption. If you need hot water immediately, activate the DHW tank booster mode, keeping in mind that this uses extra energy. If you can wait, overrule (increase) the active or next scheduled desired temperature to produce more hot water. If the problem happens daily, increase the DHW tank temperature preset value or adjust the DHW tank temperature schedule. For example, program the system to additionally heat up the DHW tank to a preset value (Storage eco = lower tank temperature) during the day.