ESIE11-02 Pre-Test Run Checks
Part 4 – Commissioning and Test Run 4–15
3
4
5
1
Symbols The table below describes the symbols.
Selecting a flow outside the curves can cause damage to or malfunction of the unit. See also
minimum and maximum allowed water flowrange. See "Technical Specifications:
EUWA*5-8KBZW1" on page 1–5 and "Technical Specifications: EUWA*10-12KBZW1" on
page 1–8.
Symbol Description
PD Pressure drop through evaporator
WFE Evaporator waterflow rate
(1) For EUWA*5KBZW1
(2) For EUWA*8KBZW1
(3) For EUWA*10KBZW1
(4) For EUWA*12KBZW1
To Next Page
Loading...