Daikin EWAA0116DAW1P - 12 Installer Settings: Tables to be Filled in by Installer

12 | Installer settings: Tables to be filled in by installer
User reference guide
56
EWAA011~016DA + EWYA009~016DA
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P620246-1B – 2023.11
12 Installer settings: Tables to be filled in by
installer
12.1 Configuration wizard
Setting Fill in…
System
Backup heater type [9.3.1]
Emergency [9.5]
Number of zones [4.4]
Glycol Filled system (overview
field setting [E‑0D])
Backup heater
Voltage [9.3.2]
Configuration [9.3.3]
Capacity step 1 [9.3.4]
Additional capacity step 2
[9.3.5] (if applicable)
Main zone
Emitter type [2.7]
Control [2.9]
Setpoint mode [2.4]
Schedule [2.1]
WD curve type [2.E]
Additional zone (only if [4.4]=1, dual zone)
Emitter type [3.7]
Control (read only) [3.9]
Setpoint mode [3.4]
Schedule [3.1]
WD curve type [3.C] (read only)
12.2 Settings menu
Setting Fill in…
Main zone
Ext thermostat type [2.A]
Additional zone (if applicable)
Ext thermostat type [3.A]