Daikin EWAA011DAV3P - Preset Values and Schedules; Using Preset Values; Using and Programming Schedules

5 | Operation
User reference guide
29
EWAA011~016DA + EWYA009~016DA
Packaged air-cooled water chillers
and packaged air to water heat pumps
4P620246-1B – 2023.11
2 Select No.
To enable weather-dependent operation for the leaving water temperature
See "5.8.4Using weather-dependent curves"[441].
5.7 Preset values and schedules
5.7.1 Using preset values
About preset values
For some settings in the system, you can define preset values. You only need to set
these values one time, then reuse the values in other screens such as the
scheduling screen. If you later want to change the value, you only have to do it in
one place.
Possible preset values
You can set the following user-defined preset values:
Preset value Where used
Electricity prices
under [7.5] User
settings >
Electricity
price
Restriction: Only
applicable if
Bivalent is
enabled by the
installer.
[7.5.1] High You can use these preset values in
[7.5.4] Schedule (weekly schedule
screen for the energy prices).
See "5.7.4Setting the energy
prices"[436].
[7.5.2] Medium
[7.5.3] Low
Additional to the user-defined preset values, the system also contains some
system-defined preset values that you can use when programming schedules.
Example: In [7.4.2] User settings > Quiet > Schedule (weekly schedule for
when the unit has to use which quiet mode level), you can use the following
system-defined preset values: Quiet/More quiet/Most quiet.
5.7.2 Using and programming schedules
About schedules
Depending on your system layout and installer configuration, schedules for
multiple controls may be available.
You can… See…
Set if a specific control needs to act according
to a schedule.
"Activation screen" in "Possible
schedules"[430]
Select which schedule you currently want to use for a specific control. The system
contains some predefined schedules. You can: