Why my Daikin FCQN125EXV1 unit does not operate?
If your Daikin Air Conditioner unit isn't operating, first, check for a power failure or a blown fuse and replace the fuse if needed. Next, ensure the power plug is properly connected. Finally, verify that the delay timer is correctly set.
What to do if water flowing out from Daikin Air Conditioner unit?
If water is flowing out from your Daikin Air Conditioner unit, switch it off and call your local dealer or a qualified serviceman.
How to fix bad odor from Daikin FCQN125EXV1?
If your Daikin Air Conditioner discharge air flow has a bad odor, the odors may be caused by cigarettes, smoke particles, perfume etc. which might have adhered onto the coil. Clean the coil to remove any adhered substances.
Why is the air flow too low in my Daikin Air Conditioner?
Low airflow in your Daikin Air Conditioner can be due to a few reasons. First, check if the air filter is dirty and clean it. Second, make sure that the air suction and discharge are not clogged. Finally, if you're in auto fan mode, the regulated temperature might not be high enough, so try increasing it.
What to do if there is condensation on Daikin FCQN125EXV1?
Condensation on the front air grille of your Daikin Air Conditioner's indoor unit is typically due to air humidity after extended operation. To address this, increase the temperature setting and operate the unit at high fan speed.
General| Brand | Daikin |
|---|---|
| Model | FCQN125EXV1 |
| Category | Air Conditioner |
| Language | English |
Explains the meaning of each character in the indoor and outdoor unit model numbers.
Lists available indoor and outdoor unit models and their classifications.
Defines the safe operating temperature and humidity limits for cooling and heating.
Illustrates the refrigerant flow paths for C and E series indoor units.
Covers safety precautions, installation clearances, and wiring.
Lists sound pressure levels (dB) for various models across different frequencies.
Shows noise criteria (NC) curves for different indoor unit models.
Provides cooling and heating performance data (TC, SC, PI) under various conditions.
Lists detailed electrical, physical, and performance specifications for the units.
Lists safety devices and their functions for indoor/outdoor units.
Electrical schematics showing connections for indoor and outdoor units.
Details cleaning and upkeep tasks for unit components.
Guides for diagnosing faults using LED indicators, error codes, and pressure readings.
To Next Page
