RA Indoor Unit SiBE121135
210 Operation Manual
6. Press to select the desired time.
7. Press .
• The time will be set.
• “ ” and the temperature blink.
8.
• To return to the time setting, press .
9. Press .
10. Press to complete the setting.
• The time can be set between 0:00 and 23:50 in 10 minute
intervals.
• To return to the ON/OFF TIMER mode setting, press
.
• Go to step 9 when setting the OFF TIMER.
Press to select the desired
temperature.
• The temperature can be set between 10˚C and 32˚C.
Cooling: The unit operates at 18˚C even if it is set at 10 to
17˚C.
Heating: The unit operates at 30˚C even if it is set at 31 to
32˚C.
• The set temperature is only displayed when the mode
setting is on.
• The temperature will be set and go to the next reservation
setting.
• To continue further settings, repeat the procedure from step 4.
• Be sure to direct the remote controller toward the indoor unit and check for a receiving tone
and flashing the OPERATION lamp.
• “ ” is displayed on the LCD and WEEKLY TIMER operation is activated.
• The TIMER lamp lights up.
• A reservation made once can be easily copied and the same settings used for another day of
the week.
Refer to copy mode.
To Next Page
Loading...
