SiBE121135 RA Indoor Unit
Operation Manual 211
WEEKLY TIMER Operation
NOTE
Notes on WEEKLY TIMER operation
Day and number ON/OFF Time Temperature
Setting Displays
• Do not forget to set the clock on the remote control first.
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER
mode) can be set with WEEKLY TIMER. Other settings for ON TIMER are based on the
settings just before the operation.
• Both WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time.
The ON/OFF TIMER operation has priority if it is set while WEEKLY TIMER is still active.
The WEEKLY TIMER will go into standby state, and “ ” will disappear from the
LCD.
When ON/OFF TIMER is up, the WEEKLY TIMER will automatically become active.
• Only the time and set temperature with the weekly timer are sent with the .
Set the weekly timer only after setting the operation mode, the fan strength, and the fan
direction ahead of time.
• Shutting the breaker off, power failure, and other similar events will render operation of the
indoor unit’s internal clock inaccurate. Reset the clock.
• The can be used only for the time and temperature settings.
It cannot be used to go back to the reservation number.
To Next Page
Loading...
