EasyManua.ls Logo

Daikin FT50GV1G6 User Manual

Daikin FT50GV1G6
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
5.0/6.0/7.1 kW Class
24000 Btu/h Class
Si041055
Question and Answer IconNeed help?

Do you have a question about the Daikin FT50GV1G6 and is the answer not in the manual?

Daikin FT50GV1G6 Specifications

General IconGeneral
BrandDaikin
ModelFT50GV1G6
CategoryAir Conditioner
LanguageEnglish

Summary

Removal of Air Filters and Front Panel

Appearance Features

Overview of the unit's appearance features, operation lamps, and thermistor.

Remove the Air Filters

Instructions for opening the front panel and removing standard air filters.

Remove Titanium Apatite Air-Purifying Filters

Procedure to unfasten hooks and remove titanium apatite photocatalytic air-purifying filters.

Remove the Front Panel

Steps to release shafts and detach the front panel from the unit.

Removal of Front Grille

Remove Service Cover

Procedure for removing the service cover by unscrewing it.

Remove Front Grille

Instructions to remove the front grille by unscrewing it and unfastening hooks.

Removal of Horizontal and Vertical Blades

Remove Horizontal Blades

Steps to open, release shafts, and slide out horizontal blades.

Remove Vertical Blades

Procedure to release shafts, unfasten hooks, and remove vertical blades.

Removal of Electrical Box, PCBs, and Swing Motors

Remove Electrical Box

Steps to remove the electrical box, including disconnecting wires and removing screws.

Remove PCBs

Procedure to remove PCBs from the signal receiver unit, including disconnecting connectors.

Remove Swing Motor for Horizontal Blades

Instructions to remove the swing motor for horizontal blades by unscrewing it.

Remove Swing Motor for Vertical Blades

Steps to remove the swing motor assembly for vertical blades.

Removal of Indoor Heat Exchanger

Disconnect Refrigerant Piping

Procedure for disconnecting gas and liquid piping, drain hose, and refrigerant piping.

Remove Indoor Unit

Steps to detach the indoor unit from the installation plate.

Remove Indoor Heat Exchanger

Procedure to unfasten hooks and remove the indoor heat exchanger unit.

Removal of Fan Motor and Fan Rotor

Remove Right Side Plate

Instructions to remove the right side plate by unscrewing it.

Remove Fan Motor and Rotor

Steps to remove the fan motor fixing plate, fan rotor screw, and fan motor.

Remove Left Side Plate

Procedure to remove the left side plate by unscrewing it.

Related product manuals