What to do if Daikin FT50FVM operation stops suddenly and the OPERATION lamp flashes?
If the Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstructions. Then, turn the breaker OFF, and then turn it ON again. Try operating the air conditioner with the remote controller. If the lamp continues to blink, further assistance may be needed.
What to do with Daikin FT50FVM after a power failure?
After a power failure, the Daikin Air Conditioner will automatically resume operation in about 3 minutes. Please wait for a while.
What to do with Daikin FT50FVM Air Conditioner during lightning?
If lightning may strike the neighboring area, stop the Daikin Air Conditioner operation and turn the breaker OFF for system protection.
General| Brand | Daikin |
|---|---|
| Model | FT50FVM |
| Category | Air Conditioner |
| Language | English |
Crucial warnings, cautions, and prohibitions for safe operation and handling.
Guidelines for selecting a suitable installation location for the air conditioner.
Considerations for avoiding noise nuisance to neighbors from the outdoor unit.
Requirements for dedicated power supply and proper electrical connections.
Guidance on professional relocation and moving of the air conditioner.
Identification and labeling of components within the indoor air conditioner unit.
Identification and labeling of components within the outdoor air conditioner unit.
Overview and labeling of buttons and features on the remote control.
Step-by-step instructions for inserting batteries into the remote controller.
Guidance on aiming the transmitter, communication distance, and avoiding obstructions.
Instructions for mounting the remote controller holder on a wall or pillar.
Procedures for setting the current time on the air conditioner's clock.
Explains how to select and use the DRY, COOL, and FAN operating modes.
Instructions for controlling the horizontal flap and vertical louvers for airflow.
Details how to activate and cancel the POWERFUL mode for maximum capacity.
Guides on setting and cancelling OFF TIMER and ON TIMER functions.
Instructions for cleaning the indoor unit, outdoor unit, and remote controller.
Procedures for cleaning or replacing air filters and the photocatalytic filter.
Addresses common operating issues that are not actual faults and their explanations.
Lists checks to perform before contacting a repair person for operational problems.
Symptoms requiring immediate service calls and recommendations for periodical maintenance.
To Next Page
