Need help?Do you have a question about the Daikin FT50MV16 and is the answer not in the manual?
General| Brand | Daikin |
|---|---|
| Model | FT50MV16 |
| Category | Air Conditioner |
| Language | English |
Overview of internal unit features before disassembly, including lamps and sensors.
Instructions for removing the primary air filters by opening the front panel and unfastening hooks.
Procedure to detach titanium apatite filters by unfastening hooks on the lower and upper sides.
Guide to releasing the front panel by unfastening shafts and sliding it from side to side.
Procedure for unscrewing and removing the service cover from the indoor unit.
Steps to detach the front grille by removing screws and unfastening hooks.
Instructions for removing horizontal air direction blades by releasing center and left/right shafts.
Procedure to remove vertical air direction blades by releasing shafts and unfastening hooks.
Steps to detach the electrical box, including removing drip proof plate and cutting clamps.
Guide to removing signal receiver unit PCBs, control PCB, and related components.
Procedure to detach the swing motor responsible for horizontal blade movement.
Instructions for removing the swing motor assembly for vertical blade operation.
Procedure for safely disconnecting gas and liquid refrigerant pipes from the indoor unit.
Steps to carefully detach the main indoor unit casing from its mounting plate.
Guide to removing the heat exchanger by unfastening hooks and lifting it out.
Procedure to remove the right side panel to access internal fan components.
Steps to detach the fan motor and rotor assembly, including fixing plates and screws.
Instructions for removing the left side plate and the fan motor bearing.
To Next Page
