Daikin FTK24NMVJU - Part 2 Specifications

ON/OFF
5
Read Before Operation
Indoor Unit
Display
Air inlet
Front panel
Air outlet
Louvers (vertical blades)
• Thelouversareinsideoftheair
outlet.
Page 14
Flap (horizontal blade)
Page 14
Model name plate Indoor temperature
sensor
• Detectstheairtemperature
aroundtheunit.
OPERATION lamp (green)
TIMER lamp (orange)
Page 17,18
Signal receiver
• Receivessignalsfromtheremote
controller.
• Whentheunitreceivesasignal,you
willhearabeepsound.
Case Sound type
Operationstart beep-beep
Settingchanged beep
Operationstop longbeep
Indoor unit ON/OFF switch
• Pressthisswitchoncetostartoperation.
Pressonceagaintostopit.
• Fortheoperationmodesetting,refertothefollowingtable.
Mode Temperature setting Airow rate
COOL 72°F(22°C) AUTO
• Thisswitchcanbeusedwhentheremotecontrollerismissing.
Names of Parts
FTK09NMVJU / FTK12NMVJU / FTKN09NMVJU / FTKN12NMVJU
01_EN_3P379751-2A.indd 5 11/12/2014 6:18:30 PM