10
NOTE
Note on setting the clock
If the indoor unit’s internal clock is not set to the correct time, ON/OFF TIMER and WEEKLY TIMER will not operate punctually.•
Turn the breaker on
After the power is turned on, the fl aps of the indoor unit opens and closes once to set •
the reference position.
To set the clock
Press 1. .
“ ” is displayed.
“
” and “ ” blink.
Press 2. to set the current day of the week.
Press
3. .
“ ” blinks.
Press 4. to set the clock to the present time.
Holding down • or button rapidly increases or decreases the time display.
Press 5. .
Point the remote controller at the indoor unit when pressing the buttons.•
“ ” blinks.
01_EN_3P291209-2.indd 10 12/8/2011 8:48:05 PM
To Next Page
Loading...
