How to stop the bad odor from my Daikin Air conditioning indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
What to do if there is a burning smell coming from Daikin Air conditioning?
If you notice a burning smell, immediately turn the breaker OFF and call the service shop.
What to do if I hear an abnormal sound during Daikin Air conditioning operation?
If you hear an abnormal sound during operation, turn the breaker OFF and call the service shop.
Why is my Daikin Air Conditioner outdoor unit leaking water?
In HEAT mode, the frost on the outdoor unit melts into water or steam during defrost operation. In COOL or DRY mode, moisture in the air condenses into water on the cool surface of the outdoor unit piping and drips.
Why my Daikin Air conditioning operation does not start soon?
You should wait for about 3 minutes.
What to do if water leaks from the indoor unit of Daikin Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
What to do if Daikin Air conditioning operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Outdoor Unit Noise Level | 48 dB(A) |
Essential safety precautions for operating and repairing the air conditioner.
Detailed list of functions for cooling-only models, categorized by type.
Detailed list of functions for heat pump models, categorized by type.
Diagrams illustrating PCB connectors for system components.
Mechanism to prevent indoor heat exchanger freezing during cooling.
Control logic for the electronic expansion valve in various modes.
Critical safety warnings and cautions for installation, operation, and maintenance.
Common issues and their corresponding troubleshooting steps and solutions.
Explanation of error codes displayed on the remote controller for fault identification.
Detailed troubleshooting steps for indoor unit related issues.
Troubleshooting steps for outdoor unit related issues, including LED indications.
Identifying and addressing issues related to insufficient refrigerant gas.
Steps to check the electronic expansion valve's operation and conductivity.
Steps for checking the power transistor, including safety measures for live parts.
To Next Page
