Daikin FTKS71HVMG - Page 16

Removal of PCBs Si04-958
14 Removal Procedure
7
Release the harness
from the hook.

When reassembling, make
sure to hook the harness.
8
Push and unfasten the
hook of the signal
receiver unit.
9
Open the signal
receiver unit.
Unfasten the hook and
remove the signal
receiver unit.
10
Unfasten the hook on
the right of the signal
receiver PCB.
(Then the signal
receiver PCB is lifted
up.)
Step
Procedure Points
(R9514)
Hook
(R13518)
Hook
Signal
receiver
unit
(R9516)
Hook
(R13519)
Signal receiver PCB
Signal receiver unit