Need help?Do you have a question about the Daikin FTN25JV1G and is the answer not in the manual?
Steps to disconnect wires, terminal boards, and remove wire fixtures.
Steps to unscrew, unhook, and remove the main electrical box.
Steps to detach and remove signal receiver and INTELLIGENT EYE sensor PCBs.
Procedure to remove display PCB and control PCB.
Steps to remove the drain pan unit from the indoor unit.
Steps to loosen screw and remove the fan motor from the unit.
Steps to remove fixing screws, disconnect pipings, and detach the unit.
Procedure to unfasten piping fixtures and various hooks for heat exchanger removal.
Steps to disconnect wires, terminal boards, and remove wire fixtures.
Steps to unscrew, unhook, and remove the main electrical box.
Steps to detach and remove signal receiver and INTELLIGENT EYE sensor PCBs.
Procedure to remove display PCB and control PCB.
Steps to remove the drain pan unit from the indoor unit.
Steps to loosen screw and remove the fan motor from the unit.
Steps to remove fixing screws, disconnect pipings, and detach the unit.
Procedure to unfasten piping fixtures and various hooks for heat exchanger removal.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions (W x H x D) | 800 x 283 x 195 mm |
| Outdoor Unit Dimensions (W x H x D) | 658 x 550 x 275 mm |
| Refrigerant | R-22 |
To Next Page
