Daikin FTX20J2V1B User Manual (English)

Other manuals for Daikin FTX20J2V1B

Operation Manual28 pages

Installation Manual18 pages

Questions and Answers:

M
Michelle StewartAug 2, 2025
Why my Daikin Air Conditioner does not operate?
- P
  Patricia BrownAug 2, 2025
  If your Daikin Air Conditioner isn't turning on and the OPERATION lamp is off, there are several things to check: * **Breaker/Fuse:** Verify that a breaker hasn't been turned OFF or a fuse hasn't blown. * **Power Failure:** Check for a power failure in your area. * **Remote Batteries:** Ensure batteries are properly installed in the remote controller. * **Timer Setting:** Make sure the timer is correctly set.
J
jeremiah22Aug 6, 2025
Why is the cooling effect poor in my Daikin FTX20J2V1B Air Conditioner?
- V
  vanessa32Aug 6, 2025
  If your Daikin Air Conditioner isn't cooling or heating effectively, consider the following: * **Air Filters:** Check if the air filters are clean. * **Blockages:** Ensure nothing is blocking the air inlet or outlet of the indoor and outdoor units. * **Temperature Setting:** Verify that the temperature setting is appropriate. * **Windows and Doors:** Confirm that all windows and doors are closed. * **Airflow:** Check that the airflow rate and air direction are set appropriately.
J
Joseph MoralesAug 11, 2025
What to do if Daikin Air Conditioner operation stops suddenly?
- C
  Christina GonzalezAug 11, 2025
  If your Daikin Air Conditioner suddenly stops and the OPERATION lamp flashes, the following could be the reason: * **Air Filters:** Check if the air filters are clean. * **Blockages:** Ensure nothing is blocking the air inlet or outlet of the indoor and outdoor units. To resolve this, clean the air filters, remove any obstacles, turn the breaker OFF, and then turn it back ON. After that, try operating the air conditioner with the remote controller.
J
Jacob BerryAug 14, 2025
What to do if Daikin FTX20J2V1B operation stops suddenly and the OPERATION lamp flashes?
- M
  Maria AndersonAug 14, 2025
  If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, clean the air filters or remove any obstacles. Then, turn the breaker OFF, and then turn it ON again. Try operating the air conditioner with the remote controller.
K
katherine71Aug 19, 2025
How to fix Daikin Air Conditioner remote controller when no signals are displayed?
- R
  richardwaltonSep 12, 2025
  If your Daikin Air Conditioner remote controller isn't displaying any signals, it's likely due to dying batteries or a malfunctioning remote controller. Replace all the batteries with new size AAA alkaline batteries. If there is a reset button, press it after replacing the batteries.
N
nmitchellAug 23, 2025
What to do if Daikin FTX20J2V1B heating stops suddenly with flowing sound?
- Z
  Zachary LopezAug 23, 2025
  If the heating operation of your Daikin Air Conditioner stops suddenly and you hear a flowing sound, you should wait for about 3 to 8 minutes.
S
santanaericAug 27, 2025
What to do if Daikin FTX20J2V1B has abnormal functioning?
- K
  Kevin DelgadoAug 27, 2025
  If your Daikin Air Conditioner is malfunctioning during operation, it might be due to interference from lightning or radio waves. Try turning the breaker OFF, then turn it back ON, and attempt to operate the air conditioner with the remote controller.

Daikin FTX20J2V1B Specifications

General

Cooling Capacity	2.0 kW
Heating Capacity	2.5 kW
Energy Efficiency Rating	A++
Outdoor Unit Dimensions (W x H x D)	658 x 550 x 275 mm
Weight (Indoor Unit)	8 kg
Power Supply	220-240V, 50Hz
Type	Split System
Refrigerant	R-410A