Daikin FTX50K2V1B - Page 9

8
English
Read Before Operation
Names of Parts
Remote Controller
Display (LCD)
• Displays the current settings.
(In this illustration, each section is
shown with its displays on for the
purpose of explanation.)
AUTO button
• Automatically selects an appropriate
operation mode (COOL or HEAT)
based on the indoor temperature and
starts the operation.
Page 10
Direct operation buttons
• Starts the COOL, DRY, HEAT or FAN
ONLY operation.
Page 10
TEMPERATURE
adjustment button
• Changes the temperature setting.
Page 11
COMFORT button
• COMFORT AIRFLOW operation.
Page 14
POWERFUL button
• POWERFUL operation.
Page 14
OFF TIMER button
(NIGHT SET mode)
Page 17
ON TIMER button
Page 16
Signal transmitter
Receiver
• To use the remote controller, aim the
transmitter at the indoor unit. If there is
anything blocking the signals between
the unit and the remote controller, such
as a curtain, the unit may not operate.
• The maximum transmission distance
is about 7m.
OFF button
• Stops the operation.
Page 11
FAN setting button
• Selects the airfl ow rate setting.
Page 12
ECONO button
• ECONO operation.
Page 15
SWING button
• Adjusts the airfl ow direction .
Page 13
TIMER CANCEL button
• Cancels the timer setting.
Page 16,17