Daikin FTXA20AW - Page 142

2 | Components
Service manual
142
FTXA20~50A(W)(S)(T) + FTXA20~50B(B)(S)(T) + RXA42+50A +
RXA20~35A(9) + RXA42+50B
Split Stylish R32
ESIE18-03D – 2021.05
aa b
a
a Screw
b Swing flap motor gearcase assembly
5 Disconnect the rocker arm from the swing raster.
6 Remove the swing flap motor gear case assembly from the indoor unit.
7 Disconnect the harness from the swing flap motor.
8 Disconnect the harness from the swing raster motor.
9 To install the swing flap motor gearcase assembly, see "Repair
procedures"[4141].
To install the swing flap motor gearcase assembly
1 Connect the harness to the swing raster motor connector.
2 Install the swing flap motor gearcase assembly on the indoor unit. Install the 3
screws, but do NOT yet tighten them.
aa b
a
a Screw
b Swing flap motor gearcase assembly
3 Connect the rocker arm to the swing raster.