To Next Page
C
Christopher WatersSep 23, 2025
Why heating operation CANNOT be selected on my Daikin FTXA35A2V1BW?
- DDavid SanchezSep 23, 2025
If you cannot select heating operation, check if the user interface's jumper J8 has not been cut.
Why heating operation CANNOT be selected on my Daikin FTXA35A2V1BW?
If you cannot select heating operation, check if the user interface's jumper J8 has not been cut.
Why does my Daikin FTXA35A2V1BW system suddenly stop operating?
Your Daikin Air Conditioner might stop operating due to sudden large voltage fluctuations to protect the system. It will automatically resume operation after about 3 minutes.
What to do if my Daikin Air Conditioner operates, but cooling or heating is insufficient?
If your Daikin Air Conditioner isn't cooling or heating sufficiently, consider the following: * Check the airflow rate and temperature settings. * Ensure the airflow direction is appropriate. * Make sure the air inlet or outlet of both the outdoor and indoor units isn't blocked; remove any obstructions. * Clean the air filters if they are clogged. * Close any open doors or windows to prevent drafts. * Check if the unit is operating in Econo or Outdoor unit quiet operation mode. * Move any furniture that might be directly under or next to the indoor unit.
What to do if my Daikin Air Conditioner ON/OFF timer does NOT operate according to the settings?
If the ON/OFF timer on your Daikin Air Conditioner isn't working as expected: * Check if the Weekly timer and ON/OFF timer are set to the same time; if so, change or deactivate one of the settings. * Verify that the clock and day of the week are set correctly.
What to do if my Daikin FTXA35A2V1BW Air Conditioner is operating, but cooling or heating is insufficient?
If your Daikin Air Conditioner isn't cooling or heating sufficiently, consider the following checks: * Make sure that the airflow rate and temperature are set properly. * Check if the airflow direction is appropriate. * Ensure that neither the air inlet nor the outlet of the outdoor or indoor unit is blocked by obstacles. Remove any obstructions to allow free airflow. * Clean the air filters if they are clogged. * Close any open doors or windows to prevent drafts. * Check if the unit is operating in Econo or Outdoor unit quiet operation mode. * Move any furniture that might be directly under or next to the indoor unit.
What to do if my Daikin FTXA35A2V1BW Air Conditioner user interface signals operate other electric appliances?
If the user interface signals from your Daikin Air Conditioner are operating other electric appliances, move the other appliances away and contact your dealer.
What to do if my Daikin FTXA35A2V1BW Air Conditioner unit does NOT receive signals from the user interface?
If your Daikin Air Conditioner unit isn't responding to the user interface: * Check the batteries in the user interface. * Ensure the transmitter isn't exposed to direct sunlight. * Check if there are any electronic starter type fluorescent lamps in the room.
What to do if my Daikin Air Conditioner front panel does NOT open?
Check for any obstructions and try to open the front panel using the user interface.
What to do if my Daikin Air Conditioner user interface display is blank?
If the user interface display of your Daikin Air Conditioner is blank, replace the batteries in the user interface.
Why does my Daikin FTXA35A2V1BW Air Conditioner ON/OFF timer does NOT operate according to the settings?
If the ON/OFF timer isn't working as expected, check if the Weekly timer and ON/OFF timer are set to the same time. If they are, change or deactivate one of the settings. Also, verify that the clock and day of the week are set correctly.
Explanation of safety symbols and their meanings used in the manual.
Instructions and warnings for the end-user's safe operation of the appliance.
Using comfort airflow and intelligent eye for enhanced operation.
Explanation of the intelligent eye sensor for energy saving.
How to activate or deactivate comfort and intelligent eye modes.
Instructions for maximizing cooling/heating effect quickly.
Using Econo and Outdoor Unit Quiet modes for efficiency.
How to program the unit to turn on or off automatically.
Procedure to set the timer for turning the unit off.
Procedure to set the timer for turning the unit on.
Setting up multiple timers for different days of the week.
Connecting the unit to a wireless network and smart devices.
Guide to identifying and fixing common operating problems.
How to view and interpret error codes displayed on the unit.
Solutions for problems related to wireless network connectivity.
General| Type | Wall Mounted |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Refrigerant | R-32 |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
| Outdoor Unit Weight | 32 kg |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| Power Supply | 230V/50Hz |
| Indoor Noise Level | 19 dB(A) |
| Energy Efficiency Ratio (Cooling) | 3.50 |
| Energy Efficiency Ratio (Heating) | 4.00 |
| Indoor Unit Noise Level (Low) | 19 dB(A) |
| Outdoor Unit Noise Level | 50 dB |
