What to do if my Daikin FTXG25EV1BS operation stops suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner suddenly stops and the OPERATION lamp is flashing, clean the air filters or remove any obstructions. Then, turn the breaker OFF, and try operating the air conditioner again.
What to do if my Daikin FTXG25EV1BS has an abnormal functioning during operation?
If your Daikin Air Conditioner is not functioning normally, turn the breaker OFF, then turn it back ON, and try operating the air conditioner again.
What to do if my Daikin Air Conditioner operation stops suddenly and the OPERATION lamp is on?
If your Daikin Air Conditioner stops suddenly, but the OPERATION lamp is on, it will automatically resume operation in about 3 minutes.
Why won't the front panel and outlet vent panel open on my Daikin FTXG25EV1BS Air Conditioner and the OPERATION lamp flashes?
If the front panel and outlet vent panel on your Daikin Air Conditioner won't open and the OPERATION lamp is flashing, remove any object that might be caught in the panel, then try operating the unit again. If the panel still doesn't open, contact your dealer.
Why does my Daikin Air Conditioner operation not start soon?
If the operation of your Daikin Air Conditioner does not start immediately, wait for about 3 minutes.
General| Brand | Daikin |
|---|---|
| Model | FTXG25EV1BS |
| Category | Air Conditioner |
| Language | English |
Covers critical warnings and cautions for safe operation and handling of the unit.
Identifies and describes the various parts of the indoor unit.
Explains the buttons and display functions of the remote controller.
Instructions for inserting batteries into the remote controller.
Provides advice on reducing energy consumption by adjusting settings and maintenance.
Specifies recommended operating conditions for different modes (COOL, HEAT, DRY).
Steps to select operation mode and start the air conditioner.
Steps to stop the air conditioner.
How to adjust the temperature setting for different modes.
How to adjust the air flow rate for different modes.
How to adjust the flap for desired air direction.
How to adjust the louvers for desired air direction.
How to activate and cancel 3-D airflow.
How to activate the comfort airflow mode for indirect air blowing.
How to deactivate the comfort airflow mode.
How to activate powerful mode for maximum cooling/heating effect.
How to deactivate the powerful operation mode.
How to activate quiet mode to reduce outdoor unit noise.
How to deactivate the outdoor unit quiet operation mode.
How to activate the intelligent eye sensor for energy saving.
How to deactivate the intelligent eye operation.
Explains how Intelligent Eye saves energy by adjusting temperature and airflow.
Details sensor detection range, sensitivity, and limitations.
Steps to set the timer to turn the unit off automatically.
How to cancel a set OFF timer.
Steps to set the timer to turn the unit on automatically.
How to cancel a set ON timer.
Example of setting both ON and OFF timers simultaneously.
How operation modes are selected and prioritized in multi-system setups.
Details on the night quiet mode for cooling operation.
How to use quiet operation with multi-system units.
How the priority room setting affects operation mode selection.
How powerful operation is prioritized based on the priority room.
How quiet operation is prioritized based on the priority room.
General cleaning instructions for the main components.
Detailed steps for opening, cleaning, and reattaching the front panel.
Steps for removing, cleaning, and replacing air filters and purifying filters.
Explains the consequences of operating with dirty filters.
Checks to perform before operating the unit.
Steps to prepare the unit for extended periods of non-use.
Explains common situations that are not actual troubles but have normal reasons.
Provides explanations for various operational issues and their causes.
Checks to perform before contacting a repair person.
Lists symptoms that indicate immediate need to call a service shop.
Instructions for proper disposal of the unit and batteries.
Importance and recommendation for professional periodic maintenance.
How to activate and use the remote controller for fault diagnosis.
List of error codes and their meanings for system and unit faults.
Explains the meaning of LED indicators on the outdoor unit PCB for fault detection.
To Next Page
