To Next PageTo Next PageHow to prepare my Daikin Air Conditioner for long-term storage?
When you are not planning to use your Daikin Air Conditioner for an extended period, take these steps: Operate the unit for 2 hours in cool mode at 30°C/86°F. Then, remove the power plug and, if applicable, cut off the independent electric circuit for the unit. Finally, remove the batteries from the remote control.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| Refrigerant | R32 |
| Noise Level (Indoor) | 41 dB(A) |
Lists critical safety warnings for installation and operation.
Highlights important cautions for installation and unit handling.
Details important information regarding the R410A refrigerant used in the unit.
Details the correct techniques for working with and flaring refrigerant pipes.
Explains how to properly connect refrigerant pipes to the indoor and outdoor units.
Outlines electrical wiring requirements, cable sizes, and connection diagrams.
Lists special precautions when handling the R410A refrigerant.
Describes the process for vacuuming the system and charging refrigerant.
Lists common faults, their causes, and suggested actions.
