5 | Operation
User Reference Guide
23
FTXP20~35M5V1B9
Daikin room air conditioners
4D520466-7C – 2020.03
2 To use fixed position, press and when the flaps and louvers reach
the desired position.
Result: and disappear from the LCD. The flaps and the louvers will
stop moving.
5.6 Comfort airflow operation
This operation can be used in heating or cooling operation mode. It will provide a
comfortable wind that will NOT come in direct contact with people. The system
automatically sets the fixed airflow position upward in Cooling and downward in
Heating operation mode.
Cooling operation mode Heating operation mode
INFORMATION
Powerful and Comfort airflow operation CANNOT be used at the same time. The last
selected function takes priority. If the vertical automatic swing is selected, Comfort
airflow operation will be cancelled.
5.6.1 To start/stop Comfort airflow operation
1 Press to start.
Result: The flap position will change, is displayed on the LCD, and the
airflow rate is set to automatic.
Mode Position of flap…
Cooling/Drying Up
Heating Down
Note: Comfort airflow operation is NOT available in Fan only mode.
2 Press to stop.
Result: The flap will return to the position from before the Comfort airflow mode;
disappears from the LCD.
5.7 Powerful operation
This operation quickly maximizes the cooling/heating effect in any operation mode.
You can get the maximum capacity.
To Next Page
Loading...
